PTFE Seamless Belts for Sealing Machine

PTFE Seamless Sealing Machine Belts Overview

PTFE seamless sealing machine belts are made of high tensile fibreglass or Kevlar, knitted by special equipment and coated with fine PTFE. Seamless belt overcomes former problems of traditional joint fusing machine belt such as bad stability, ruptures, and deflecting for different girth on two sides at the joint. The using life of seamless PTFE Fusing Machine Belt is much longer than all kinds of joint PTFE Fusing Machine Belt.

PTFE sealing belts are ideally suited where thermal transfer through the surface of the belt is required to seal plastic bags.

Sealer belts tend to be two belts that run in tandem on the conveyor with a hot plate that sits in contact with the inside of the belts as they run.

The heat transfers through the belt surface sealing the plastic bag as it conveys it through the machine.

Product Description

Teflon belt for sealing machine is designed for vertical packaging machines to pack toilet tissue and hygiene rollsthis continuous sealing machine belt acts as a non-stick and heat transfer barrier between heating plate andwrapping film. Each machine require two belts two belts that run in tandem side by side with a hot plate that incontact with the inside of the belts as they run. The hot plate heats the belts to melt the plastic wrapping on bothsides at the same time as it conveys the roll and tissue through the machine.

Product Advantages

Excellent release property and easy to clean

High temperature resistant from -173'C to 260°C

resistant to chemicals, HF, UV and lR exposure

Dimensional stable and high tensile strength

Size can be customized to fit machines

PTFE Seamless Sealing Machine Belts Specification 

See the table below for regular sizes, other sizes can be customized

What are PTFE Seamless Belts for Heat Sealers?

These PTfE Seamless Belts are made from jointless woven glass fiber fabric, With PTfE coating, this belt itself has no joint which helbsincrease the sealing efficiency since no bump or uneven layer can be found.

Jointless woven glass fiber fabric is excellent for seaing because there are no bumps or uneven layers. The PTfE coating on this beltitself creates a smooth surface that increases efficiency with every usage.