AT10 PU Timing Belts
The AT10 PU timing belt is standard delivered with steel or kevlar cords. The AT10 PU toothed belt has a pitch of 10mm , extremely suitable for transport where good positioning is required. We can customize the AT10 PU toothed belt according to your wishes.
- Introduction
Introduction
AT10 PU Timing Belts
Product details Timing belt AT10 | ||
Colour | grey /white/ transparent | |
Shore hardness (A) | 90° Shore A | |
Cords | steel/ kevlar | |
Width | 5-400mm | |
Length | Open length | |
Endless with joint | ||
Seamless (moulded) | ||
Working temperature | -20-+80C | |
Standard cords | steel 0.9 mm | |
Width tollerance | +/- 0.5 mm | |
Height tollerance | +/- 0.3 mm | |
Length tollerance | +/- 0.8 mm | |
Weight per meter | +/- 64g/10mm belt width per meter | |
Minimum diameter pulley | 45.90 mm | |
Minimum diameter counterbend | 90.00mm | |
Maximum load (N) | Open | Endless with joint |
10mm Maximum load (N) | 1210 | 605 |
50mm Maximum load (N) | 3410 | 1705 |
100mm Maximum load (N) | 6900 | 3450 |
PU timing belt AT10- DA Symmetrical arrangement of the two-side teeth
PU timing belt AT10- DB Staggered arrangement of the two-side teeth
PU timing belt AT10 - K6/K10/K13 PU timing belt ATK10 - K6/K10/K13
PU timing belt TG10 - K6/K10/K13
PU timing belt AT10 - BAT10/BATK10/ATN10/ATP10/
PU timing belt AT10-Perforations /Grinding
PU timing belt - PAZ /NFT
PU timing belt - PAR/NFB
Available Options: