235x15mm 29 Holes Yellow and White Double-Layer Slow Down Suction Belt for Heidelberg SM52 PM52

Product Overview

The 235x15mm 29 Holes Yellow and White Double-Layer Slow Down Suction Belt is designed for compatible Heidelberg SM52 and PM52 offset printing machines. Featuring a double-layer construction in yellow and white with 29 perforated holes, this belt is intended for paper handling and suction-assisted sheet deceleration in printing equipment.

With a specified size of 235mm in length and 15mm in width, this slow down suction belt is a replacement component for printing machine operators who need to maintain reliable paper transport and consistent sheet handling.

The perforated structure supports suction-assisted paper control, while the double-layer construction provides a distinctive two-color belt design. Correct belt dimensions, hole positioning, and construction are important for ensuring compatibility with the original machine configuration.

For commercial printing facilities, choosing the appropriate slow down suction belt can support routine maintenance, help maintain stable paper handling, and reduce avoidable interruptions caused by worn or unsuitable belt components.

Key Features of the 235x15mm Slow Down Suction Belt

1. 235 x 15mm Belt Dimensions

This belt has a specified length of 235mm and a width of 15mm. These dimensions make it important to verify the original belt measurements before purchasing a replacement.

Customers should also confirm the thickness and other structural details against the existing belt or machine specifications.

2. 29-Hole Perforated Design

The belt features 29 perforated holes for use in a compatible suction-assisted paper-handling system. The hole arrangement is an important part of the product specification because it must correspond to the machine's suction requirements.

Before ordering, verify the hole diameter, spacing, and overall layout to ensure that the replacement belt matches the original component.

3. Yellow and White Double-Layer Construction

The belt features a yellow and white double-layer design. This two-color construction is a defining characteristic of the product and helps distinguish it from other printing machine suction belts.

The exact material composition and the function of each layer should be confirmed according to the specific product version.

4. Designed for Compatible Heidelberg SM52 and PM52 Machines

This slow down suction belt is intended for compatible Heidelberg SM52 and PM52 offset printing machine configurations.

Because machine specifications and belt arrangements can vary, customers should confirm compatibility using the original part number, existing belt, or detailed product photographs before placing an order.

5. Suitable for Replacement and Maintenance

The belt is suitable for replacement when the existing component shows wear, damage, deformation, or deterioration that affects its intended function.

Selecting a replacement with the correct dimensions and perforation pattern helps support proper installation and reliable operation of the paper-handling system.

Product Specifications

Note: Belt thickness, material composition, hole diameter, hole spacing, and detailed compatibility should be confirmed before ordering.

Applications of the Yellow and White Double-Layer Suction Belt

The 235x15mm 29-hole slow down suction belt is intended for compatible offset printing machine paper-handling systems.

Typical application areas include:

• Offset printing equipment: Used in compatible Heidelberg SM52 and PM52 configurations.

• Paper sheet handling: Supports controlled movement of individual sheets during machine operation.

• Suction-assisted transport: The perforated design is intended to work with the machine's suction system.

• Printing machine maintenance: Provides a replacement option for worn or damaged original belts.

• Commercial printing production: Supports maintenance requirements in printing facilities that depend on reliable paper transport.

The precise installation position and operating function should be confirmed against the original machine assembly.

Why Are the 29 Holes Important?

For a perforated suction belt, the number and arrangement of the holes are important product characteristics. The holes must work with the machine's suction system to provide the intended paper-holding and transport performance.

When replacing the original belt, buyers should pay attention to more than the total number of holes. Hole diameter, spacing, alignment, and belt positioning may also affect compatibility.

Choosing a belt with the correct perforation pattern helps reduce the risk of installation problems and supports the intended operation of the paper-handling system.

Benefits of Choosing the Correct Replacement Belt

A correctly specified slow down suction belt can help printing machine operators maintain their equipment and manage paper transport more consistently.

Potential maintenance benefits include:

• Maintaining the intended suction-assisted paper-handling function.

• Supporting controlled sheet movement during the delivery process.

• Reducing replacement errors caused by incorrect dimensions or hole layouts.

• Simplifying routine maintenance by matching the original belt specifications.

• Helping minimize avoidable production interruptions associated with worn belt components.

Actual performance depends on belt construction, machine condition, suction settings, paper characteristics, and installation accuracy.

How to Choose the Right Heidelberg SM52 / PM52 Suction Belt

Before purchasing a replacement belt, check the following specifications:

Belt size: Confirm the 235mm length and 15mm width.

Number of holes: Verify that the belt has 29 holes.

Perforation layout: Compare the hole diameter, spacing, and positions with the original belt.

Layer construction: Confirm the yellow and white double-layer design.

Belt thickness and material: Check these details against the original component because they have not been specified in the basic product dimensions.

Machine compatibility: Confirm the exact machine model and original part reference.

Providing photographs of the original belt, including the perforations and side profile, can help simplify product identification and specification confirmation.

Why Choose Yonghang Transmission Belt?

Yonghang Transmission Belt supplies belt products for industrial machinery and specialized equipment applications. We understand that replacement belts must be selected according to their dimensions, construction, and intended operating conditions.

For customers looking for a 235x15mm 29-hole yellow and white double-layer slow down suction belt, Yonghang can assist with product inquiries and specification confirmation.

When requesting a quotation, please provide the required quantity, machine model, original part number if available, and photographs of the existing belt. This information helps our team evaluate the requirements and confirm the appropriate product version.

Contact Yonghang Transmission Belt to discuss your replacement belt requirements and request a quotation.

Frequently Asked Questions

1. What are the dimensions of this slow down suction belt?

The belt measures 235mm in length and 15mm in width. Additional specifications, including thickness and perforation dimensions, should be confirmed before ordering.

2. How many holes does this belt have?

This model features 29 holes. The hole diameter, spacing, and arrangement should also match the requirements of the original machine.

3. What does the yellow and white double-layer design mean?

It describes the belt's two-layer, two-color construction. The exact materials and the function of each layer should be confirmed for the specific product version.

4. Is this belt compatible with Heidelberg SM52 and PM52 printing machines?

It is intended for compatible Heidelberg SM52 and PM52 configurations. Please verify the original part number, dimensions, and hole layout to confirm compatibility with your particular machine.

5. What information is needed to request a quotation?

Please provide the product dimensions, 29-hole specification, machine model, required quantity, and photographs of the original belt. Information about thickness, hole spacing, and material is also helpful.

Request a Quote

Looking for a 235x15mm 29 Holes Yellow and White Double-Layer Slow Down Suction Belt for Heidelberg SM52 PM52?

Contact Yonghang Transmission Belt with your machine details and replacement requirements. Our team can help confirm the product specifications and provide quotation information.

Product Keywords: 235x15mm Slow Down Suction Belt, 29 Holes Suction Belt, Yellow and White Double-Layer Belt, Heidelberg SM52 Suction Belt, Heidelberg PM52 Suction Belt, Offset Printing Machine Belt, Perforated Printing Belt, Printing Machine Replacement Belt.