D5M-DL PU Timing Belt
Double-toothed belts are used for drives with axles that rotate in opposite directions. The D5M PU timing belt is standard delivered with steel or kevlar cords. The D5M PU toothed belt has a pitch of 5mm , extremely suitable for transport where good positioning is required. We can customize the D5M PU toothed belt according to your wishes.Model DA Symmetrical arrangement of the two-side teeth;Model DB Staggered arrangement of the two-side teeth.
- Introduction
Introduction
D5M-DL PU Timing Belt
Product details Timing belt D5M | ||
Colour |
white/ transparent/black |
|
Shore hardness (A) |
90° Shore A |
|
Cords |
steel/ kevlar |
|
Width |
5-400mm |
|
Length |
Open length |
|
Endless with joint | ||
Seamless (moulded) | ||
Working temperature |
-20-+80C |
|
Standard cords |
steel 0.5 mm |
|
Width tollerance |
+/- 0.5 mm |
|
Height tollerance |
+/- 0.2 mm |
|
Length tollerance |
+/- 0.8 mm |
|
Weight per meter |
+/- 48g/10mm belt width per meter |
|
Minimum diameter pulley |
19.95 mm |
|
Minimum diameter counterbend |
50 mm |
|
Maximum load (N) |
Open |
Endless with joint |
10mm Maximum load (N) |
860 |
430 |
50mm Maximum load (N) |
4960 |
2480 |
100mm Maximum load (N) |
10200 |
5100 |
PU timing belt D5M - DA Symmetrical arrangement of the two-side teeth
PU timing belt D5M - DB Staggered arrangement of the two-side teeth
PU timing belt D5M - Perforations /Grinding
PU timing belt - PAZ /NFT
PU timing belt - PAR/NFB
Available Options:
|