All Categories
Get a Quote
×

Get in touch

Herringbone Pulleys

Home /  Products  /  Pulleys  /  Herringbone Pulleys

W Type Herringbone Timing Pulley

W Type herringbone timing pulleys for 8mm pitch, 32mm wide synchronous belts. Standard models from 18 to 224 teeth with steel, GS400 and GG material options.

  • Introduction
Introduction

Product Overview

The W Type Herringbone Timing Pulley is a precision-engineered mechanical transmission component designed for industrial machinery and synchronized belt drive systems. Identified as the White Series in Yonghang's standard herringbone pulley system, this pulley is designed to work with an 8 mm pitch W Type herringbone timing belt.

Its specially arranged helical teeth provide progressive engagement with the corresponding belt profile. Compared with conventional straight-tooth transmission arrangements, the herringbone design is intended to balance axial force components and support stable belt operation.

Yonghang offers W Type herringbone pulleys in multiple tooth counts and structural configurations, covering small-diameter drive arrangements as well as larger industrial transmission systems.

According to the standard specification chart, the W Series has a pulley width of 33 mm and is designed for a 32 mm wide timing belt. Standard tooth counts range from 18 to 224 teeth, with several mounting and hub configurations available.

The pulley specifications include multiple dimensional parameters, including R, S, U, H, d, W, Y, Z, and maximum bore diameter. These dimensions allow machinery manufacturers and maintenance engineers to select a suitable pulley according to their installation requirements.

Standard profile of herringbone pulley.jpg

Key Features

1. 8mm Herringbone Tooth Profile

The W Type uses an 8 mm nominal tooth pitch. Its herringbone tooth arrangement is designed to provide progressive tooth engagement and balanced force distribution during operation.

2. White Series Standard Design

The W Type is identified as the White Series in Yonghang's standard pulley system.

It is designed for compatibility with the corresponding 8 mm pitch, 32 mm wide herringbone timing belt.

3. Multiple Tooth Counts

Available standard configurations include 18, 20, 22, 24, 25, 26, 28, 30, 32, 34, 36, 38, 40, 44, 45, 48, 50, 52, 56, 60, 63, 64, 68, 72, 75, 76, 80, 90, 112, 140, 180, and 224 teeth.

4. Multiple Material Options

According to the supplied specification chart, the pulley material varies with the model size:

  • Steel for smaller tooth-count models.

  • GS400 ductile cast iron for intermediate models.

  • GG grey cast iron for selected larger models.

5. Industrial Transmission Design

The product documentation describes high-quality raw materials, static balancing, anti-oxidation treatment, and inspection of the matched belt and pulley assembly as part of the manufacturing approach.

Product Specifications

Item Specification
Product Name W Type Herringbone Timing Pulley
Series White Series
Tooth Pitch 8 mm
Matching Belt Width 32 mm
Pulley Width W 33 mm
Belt Thickness Th 5.33 mm
Belt Tooth Height H 3.05 mm
Standard Tooth Counts 18–224 teeth
Standard Model Prefix W-
Material Steel / GS400 / GG
Maximum Bore Depends on model
Drawing References Figures 1, 2 and 3
Unit mm

Standard W Type Herringbone Pulley Dimensions

All dimensions below are taken from Yonghang's supplied standard pulley specification chart. The letter designations R, S, U, H, d, W, Y, and Z follow the original engineering drawing.

Model Teeth Fig. R S U H d W Y Z Max. Bore
W-18S-MPB 18 1 45.84 44.47 - 38.4 12.7 33 43 10 26
W-20S-MPB 20 1 50.93 49.56 - 40.7 12.7 33 45 12 27
W-22S-MPB 22 1 56.02 54.65 - 45.9 12.7 33 45 12 31
W-24S-MPB 24 1 61.12 59.75 - 51.0 12.7 33 49 16 34
W-25S-MPB 25 1 63.66 62.29 - 53.5 12.7 33 49 16 36
W-26S-MPB 26 1 66.21 64.84 - 57.8 12.7 33 49 16 39
W-28S-MPB 28 1 71.30 69.93 - 62.0 12.7 33 49 16 41
W-30S-MPB 30 1 76.40 75.03 - 67.0 12.7 33 49 16 45
W-32S-MPB 32 1 81.49 80.12 - 72.0 12.7 33 49 16 48
W-34S-MPB 34 1 86.58 85.21 - 77.0 12.7 33 49 16 51
W-36S-MPB 36 1 91.68 90.30 - 82.0 12.7 33 49 16 55
W-38S-MPB 38 1 96.77 95.40 - 87.0 12.7 33 49 16 58
W-40S-MPB 40 1 101.86 100.49 - 92.0 12.7 33 49 16 62
W-44S-MPB 44 1 112.05 110.68 - 102.0 12.7 33 49 16 68
W-45S-MPB 45 1 114.59 113.22 - 105.0 12.7 33 49 16 70
W-48S-MPB 48 1 122.23 120.86 - 112.0 12.7 33 49 16 75
W-50S-MPB 50 1 127.33 125.96 - 118.0 12.7 33 49 16 79
W-52S-MPB 52 1 132.42 131.05 - 123.0 12.7 33 49 16 82
W-56S-MPB 56 1 142.61 141.24 - 133.0 12.7 33 49 16 89
W-60S-MPB 60 1 152.79 151.42 - 143.0 12.7 33 49 16 96
W-63S-MPB 63 1 160.43 159.06 - 151.0 12.7 33 49 16 101
W-64S-MPB 64 1 162.98 161.61 - 153.0 12.7 33 49 16 102
W-68S-MPB 68 2 173.17 171.79 152 120.0 25.4 33 49 16 80
W-72S-MPB 72 2 183.35 181.98 162 120.0 25.4 33 49 16 80
W-75S-MPB 75 2 190.99 189.62 170 120.0 25.4 33 49 16 80
W-76S-MPB 76 2 193.54 192.17 172 120.0 25.4 33 49 16 80
W-80S-MPB 80 2 203.72 202.35 182 120.0 25.4 33 49 16 80
W-90S-MPB 90 2 229.19 227.82 208 120.0 25.4 33 49 16 80
W-112S-MPB 112 2 285.21 283.84 264 120.0 25.4 33 49 16 80
W-140S-MPB 140 2 356.52 355.15 335 150.0 25.4 33 49 16 100
W-180S-MPB 180 3 458.38 457.00 433 150.0 25.4 33 49 16 100
W-224S-MPB 224 3 570.43 569.04 545 150.0 25.4 33 49 16 100

Material Classification

Model Range Material
W-18S-MPB to W-64S-MPB Steel
W-68S-MPB to W-140S-MPB GS400 Ductile Cast Iron
W-180S-MPB to W-224S-MPB GG Grey Cast Iron

Matching W Type Timing Belt Specifications

Parameter Standard Value
Belt Pitch 8 mm
Belt Width 32 mm
Overall Belt Thickness 5.33 mm
Tooth Height 3.05 mm

Standard Belt Lengths Listed in the PPT:

640, 720, 800, 896, 1000, 1120, 1200, 1280, 1440, 1600, 1792, 2000, 2240 and 2400 mm.

Applications

W Type herringbone pulleys can be considered for:

  • Heavy-duty industrial synchronous transmission systems.

  • Textile and fiber-processing machinery.

  • Industrial automation equipment.

  • Precision machine tools.

  • New energy production equipment.

  • Metallurgical machinery.

  • Shipbuilding and petrochemical equipment.

  • Specialized low-noise drive systems.

Standard Pulley Tolerances

Diameter Range OD Tolerance Radial Tolerance Axial Tolerance Max. Pitch Variation
0–101.6 -0/+0.13 0.13 0.12 0.10
101.6–177.8 -0/+0.13 0.13 0.15 0.10
177.8–304.8 -0/+0.15 0.15 0.20 0.10
304.8–508 -0/+0.18 0.20 0.35 0.10
508–750 -0/+0.20 0.30 0.43 0.10

All dimensions and tolerances are in millimeters.

Frequently Asked Questions

Q1: What is a W Type herringbone timing pulley?

It is a pulley designed for the White Series 8 mm pitch herringbone timing belt, with a specified pulley width of 33 mm.

Q2: What is the difference between belt width and pulley width?

The standard W belt width is 32 mm, while the pulley width W in the pulley drawing is 33 mm. These are separate dimensions.

Q3: Which tooth counts are available?

The standard chart lists 32 configurations from 18 to 224 teeth, including the intermediate tooth counts shown in the dimensional table.

Q4: What materials are available?

The chart lists steel, GS400 ductile cast iron, and GG grey cast iron, depending on pulley size.

Q5: Can I order a custom bore?

The table provides a standard bore dimension d (H8) and a maximum bore for each model. Special bore requirements should be reviewed against the actual shaft and mounting drawing.

Request a Quote

Contact Yonghang with your required tooth count, bore diameter, shaft dimensions, matching belt specification, and order quantity.

Product: W Type Herringbone Timing Pulley
Pitch: 8 mm
Belt Width: 32 mm
Pulley Width: 33 mm
Models: W-18S-MPB to W-224S-MPB

RELATED PRODUCT

Related Search