O Type Herringbone Timing Pulley
O Type orange series herringbone timing pulleys with 14mm pitch and 72mm pulley width. Detailed specifications for 28 to 168 tooth models and multiple material options.
- Introduction
Introduction
Product Overview
The O Type Herringbone Timing Pulley is an industrial synchronous transmission component designed for wide belt drive systems requiring coordinated power transmission and stable mechanical engagement.
Identified as the Orange Series in Yonghang's standard herringbone pulley system, the O Type is designed to match a 14 mm pitch timing belt with a standard width of 70 mm.
The corresponding pulley has a standard width W of 72 mm. Its herringbone tooth structure is designed to provide progressive engagement with the belt, helping balance lateral forces and support smooth running in a correctly matched transmission assembly.
The O Series provides 21 standard tooth-count options, ranging from 28 to 168 teeth. The technical catalog specifies several pulley configurations, including different hub dimensions, bore dimensions, maximum bore capacities, and material choices.
This wide selection enables machinery manufacturers to select suitable pulley dimensions for different shaft layouts, transmission distances, and mechanical installation requirements.
Yonghang supplies O Type herringbone timing pulleys for industrial machinery manufacturers, equipment maintenance suppliers, and distributors seeking standardized transmission components.

Key Features
1. Orange Series 14mm Pitch
The O Type belongs to the Orange Series and has a nominal tooth pitch of 14 mm.
It is designed for compatible O Type herringbone timing belts.
2. Wide 70mm Belt Compatibility
The corresponding timing belt width is 70 mm, while the standard pulley width W is 72 mm.
Both dimensions should be considered when designing or replacing an existing transmission assembly.
3. Extended Tooth Count Selection
The standard O Series includes 28, 30, 32, 34, 36, 38, 40, 43, 45, 48, 50, 56, 60, 63, 71, 75, 80, 90, 112, 140, and 168 tooth configurations.
4. Different Material Options
According to the supplied technical chart:
Steel is specified for 28–56 tooth models.
GS400 ductile cast iron is specified for 60–80 tooth models.
GG grey cast iron is specified for 90–168 tooth models.
5. Heavy-Duty Transmission Design
The herringbone arrangement is designed to support progressive belt engagement and balanced force distribution for compatible synchronous industrial drives.
The product documentation also describes static balancing and anti-oxidation treatment as part of its pulley manufacturing approach.
Product Specifications
| Item | Specification |
|---|---|
| Product Name | O Type Herringbone Timing Pulley |
| Series | Orange Series |
| Tooth Pitch | 14 mm |
| Matching Belt Width | 70 mm |
| Pulley Width W | 72 mm |
| Belt Thickness Th | 8.64 mm |
| Belt Tooth Height H | 5.33 mm |
| Standard Tooth Counts | 28–168 teeth |
| Model Prefix | O- |
| Materials | Steel / GS400 / GG |
| Bore | d (H8), according to model |
| Maximum Bore | According to model |
| Drawing References | Figures 1, 2 and 3 |
| Dimension Unit | mm |
Standard O Type Herringbone Pulley Dimensions
The following table contains the detailed O Series specifications from the supplied standard pulley chart.
| Model | Teeth | Fig. | R | S | U | H | d | W | Y | Z | Max. Bore |
|---|---|---|---|---|---|---|---|---|---|---|---|
| O-28S-MPB | 28 | 1 | 124.78 | 121.99 | - | 109.0 | 25.4 | 72 | 92 | 20 | 73 |
| O-30S-MPB | 30 | 1 | 133.69 | 130.90 | - | 117.5 | 25.4 | 72 | 92 | 20 | 78 |
| O-32S-MPB | 32 | 1 | 142.61 | 139.81 | - | 126.5 | 25.4 | 72 | 98 | 26 | 84 |
| O-34S-MPB | 34 | 1 | 151.52 | 148.73 | - | 135.5 | 25.4 | 72 | 98 | 26 | 90 |
| O-36S-MPB | 36 | 1 | 160.43 | 157.64 | - | 144.0 | 25.4 | 72 | 98 | 26 | 95 |
| O-38S-MPB | 38 | 1 | 169.35 | 166.55 | - | 153.0 | 25.4 | 72 | 98 | 26 | 101 |
| O-40S-MPB | 40 | 1 | 178.26 | 175.46 | - | 162.0 | 25.4 | 72 | 98 | 26 | 107 |
| O-43S-MPB | 43 | 1 | 191.63 | 188.83 | - | 174.0 | 25.4 | 72 | 88 | 16 | 116 |
| O-45S-MPB | 45 | 1 | 200.54 | 197.75 | - | 183.0 | 25.4 | 72 | 88 | 16 | 122 |
| O-48S-MPB | 48 | 1 | 213.91 | 211.12 | - | 197.0 | 25.4 | 72 | 88 | 16 | 131 |
| O-50S-MPB | 50 | 1 | 222.82 | 220.03 | - | 205.0 | 25.4 | 72 | 88 | 16 | 137 |
| O-56S-MPB | 56 | 1 | 249.56 | 246.77 | - | 230.0 | 25.4 | 72 | 88 | 16 | 153 |
| O-60S-MPB | 60 | 2 | 267.39 | 264.59 | 230 | 150.0 | 25.4 | 72 | 88 | 16 | 100 |
| O-63S-MPB | 63 | 2 | 280.76 | 277.96 | 243 | 150.0 | 25.4 | 72 | 88 | 16 | 100 |
| O-71S-MPB | 71 | 2 | 316.41 | 313.62 | 279 | 150.0 | 25.4 | 72 | 88 | 16 | 100 |
| O-75S-MPB | 75 | 2 | 334.24 | 331.44 | 296 | 180.0 | 25.4 | 72 | 88 | 16 | 120 |
| O-80S-MPB | 80 | 2 | 356.52 | 353.72 | 319 | 180.0 | 25.4 | 72 | 88 | 16 | 120 |
| O-90S-MPB | 90 | 2 | 401.08 | 398.29 | 358 | 200.0 | 25.4 | 72 | 88 | 16 | 133 |
| O-112S-MPB | 112 | 3 | 499.12 | 496.33 | 456 | 200.0 | 25.4 | 72 | 88 | 16 | 133 |
| O-140S-MPB | 140 | 3 | 623.91 | 621.11 | 581 | 220.0 | 25.4 | 72 | 88 | 16 | 147 |
| O-168S-MPB | 168 | 3 | 748.69 | 745.89 | 706 | 220.0 | 25.4 | 72 | 88 | 16 | 147 |
Material Classification
| Model Range | Material |
|---|---|
| O-28S-MPB to O-56S-MPB | Steel |
| O-60S-MPB to O-80S-MPB | GS400 Ductile Cast Iron |
| O-90S-MPB to O-168S-MPB | GG Grey Cast Iron |
Matching O Type Timing Belt Specifications
| Parameter | Standard Value |
|---|---|
| Belt Pitch | 14 mm |
| Belt Width | 70 mm |
| Overall Belt Thickness | 8.64 mm |
| Tooth Height | 5.33 mm |
Standard Belt Lengths Listed in the PPT:
1120, 1190, 1260, 1400, 1568, 1750, 1960, 2100, 2240, 2380, 2520, 2660, 2800, 3136, 3304, 3500 and 3920 mm.
Applications
O Type herringbone pulleys can be considered for:
Wide industrial synchronous transmission systems.
Heavy-duty mechanical drive equipment.
Textile manufacturing lines.
New energy production machinery.
Metallurgical processing equipment.
Shipbuilding and petrochemical machinery.
Industrial conveyor drive systems.
Precision automated production equipment.
Standard Pulley Tolerances
| Diameter Range | OD Tolerance | Radial Tolerance | Axial Tolerance | Max. Pitch Variation |
|---|---|---|---|---|
| 0–101.6 | -0/+0.13 | 0.13 | 0.12 | 0.10 |
| 101.6–177.8 | -0/+0.13 | 0.13 | 0.15 | 0.10 |
| 177.8–304.8 | -0/+0.15 | 0.15 | 0.20 | 0.10 |
| 304.8–508 | -0/+0.18 | 0.20 | 0.35 | 0.10 |
| 508–750 | -0/+0.20 | 0.30 | 0.43 | 0.10 |
All dimensions and tolerances are in millimeters.
Frequently Asked Questions
Q1: What does O Type mean?
O Type represents the Orange Series in Yonghang's standard herringbone pulley system. It has a 14 mm pitch and is designed for a 70 mm wide timing belt.
Q2: What is the standard pulley width?
The standard O Series pulley width W is 72 mm.
Q3: What are the available tooth counts?
The standard catalog lists 21 tooth-count options between 28 and 168 teeth.
Q4: What is the maximum bore size?
The maximum bore depends on the selected model. The listed values range from 73 mm to 153 mm.
Q5: Which materials are specified?
The catalog specifies steel, GS400 ductile cast iron, and GG grey cast iron according to model size.
Q6: Can I select a custom bore?
The standard chart provides d (H8) and maximum bore dimensions. Customized shaft bore and mounting requirements should be evaluated against the selected pulley structure.
Request a Quote
Please provide the required O Series model, tooth count, shaft bore, mounting dimensions, matching belt specification, and purchasing quantity.
Product: O Type Herringbone Timing Pulley
Pitch: 14 mm
Belt Width: 70 mm
Pulley Width: 72 mm
Models: O-28S-MPB to O-168S-MPB

EN
AR
HR
DA
NL
FR
DE
EL
HI
IT
JA
KO
NO
PL
PT
RO
RU
ES
TL
IW
ID
SR
SK
UK
VI
TH
TR
AF
MS
IS
HY
AZ
KA
BN
LA
MR
MY
KK
UZ
KY








